[FOR SALE] W2`s, X Heads, 742 Chunk and DEEEP Oil Pan

-
Status
Not open for further replies.

Thanatos340

Well-Known Member
Joined
Oct 23, 2012
Messages
138
Reaction score
20
Location
Marietta
Rating - 0%
0   0   0
Contact seller
Cleaning out the shop and looking for a good home for some of my fathers old Race parts. All parts have been sitting on shelf for the past 10 years in the shop.

1. W2 Heads. Bare castings, Never touched, No porting done. Will need to be cleaned up but I will guarantee no problems with these heads (Cracks or anything like that). They do have a good bit of surface rust but should clean up just fine. $600

2. X Heads. Bare castings. No Porting done. Will need to be cleaned up but I guarantee no problems (Cracks or anything like that). Will also need clean up of surface rust. $400

The Flash from the camera makes the surface rust look MUCH worse than it really is. I will try to get better pictures tomorrow on both sets of heads.

3. 8 3/4 Chunk. 742 Housing, 5:38 Richmond gears, Rebuilt sure grip (Ten years ago when pulled and placed on the shelf). Only about ten 1/8 mile runs on this chunk. Dad had just had this built and ran it only a couple time before he passed away. He had about $1500 in the chunk alone at that time. We puled the chunk and sold the car at that time. New everything at that time. It was kept in a garbage bag on a shelf in a climate controlled shop since then. $950 or trade for an equivalent chunk with 4:10 or 3:91 gears. May even consider 3:55.

4. Super Deep Moroso Drag Race Pan for 360. includes sweep Pickup and new Oil Pump made for this Pan. $300

5. I also have a 904 9" Converter (4500 RPM Stall), Neutral Balance That I would sell for $400 or trade for an equivalent 904 Converter with 3000 to 3500 stall (Neutral Balance or 360 LA Balance). Will get Pics tomorrow.

I would prefer not to ship any of these items as I don't want to have to build crates and deal with freight shipping. I am willing to drive up to 2 hours any direction from Atlanta, GA to meet any buyers in person though.
 

Attachments

  • Chunk-1.jpg
    30.9 KB · Views: 610
  • Chunk-2.jpg
    97.4 KB · Views: 613
  • Chunk-3.jpg
    33.9 KB · Views: 591
  • OilPan 1.jpg
    27.4 KB · Views: 604
  • Oil PAn 2.jpg
    81.8 KB · Views: 592
  • X-1.jpg
    35.9 KB · Views: 601
  • W2-1.jpg
    34.7 KB · Views: 600
I'll take the W2 heads if you will ship them.

I am hoping to sell them somewhat locally to avoid shipping however If I still have them in a couple weeks and you are still interested at that time, I will see if we can make it happen. For now, I really want to avoid shipping if possible.

Also for anyone else, I am more than wiling to do Trading for any or all of these parts.

Parts I need are:
(All are for 73 Duster with 360/408, 904 Trans, 8 3/4 Rear)
Caltracs and Mono Leafs
Dougs or TTI headers
Complete 2 1/2" or 3" Exhaust
Good Posi/Sure grip Chunk with 3:55 to 4:10 gears
Good (NOT China Made) Roller Tip Rockers 1.5 ratio
Wilwood Front Brake Setup
Good 904 Converter 3000ish stall, Neutral Balance or LA 360 Balance.

If you have any of the above and would be interested in trading for any of the parts I have listed, Let me know and lets work it out. Can do +cash either way to make things work.

Also all prices are somewhat negotiable. (Let be real. Not giving them away but willing to consider reasonable offers)
 
Status
Not open for further replies.
-
Back
Top