my turn light is my arm

clhyer said

I know this is stupid, but you have checked to make sure you are putting the right size fuse in there, right?
When did the problem start? Had you done any work on the car just beforehand - maybe installing carpet or something where you may have damaged the wiring with a screw?
C

Click to expand...

Actually not stupid at all. And make sure the fuse clips are not corroded and are tight making good contact.


When I was in HVAC we could have easily killed a guy. We were retrofitting a house with natural gas from electric. The new furnace / duct / and gas pipe were all being "roughed in." The gas pipe was not yet hooked to the furnace. One of the guys, on a ladder, had a piece of duct balancing on his head and reached over to the gas pipe to steady himself and got a nasty shock.

Turns out the homeowner had illegally installed a piece of romex near a closet molding, where the gas pipe run by. One of our guys had installed a pipe hanger and had

NEATLY RUN A SCREW RIGHT THROUGH the hot lead of the Romex, connecting the gas pipe to 120VAC

The pipe was just getting installed, and the ground bond had not been installed yet.