carb size for mini blower

MiradaMegaCab said
What is the Compression Ratio?
That cam has a 110° LSA, typically you'd want a wide LSA around 112 to 114. If your CR is high (10:1) then the xe284 will bleed off boost.
No need for a boost referenced regulator.
I run a Holley HP 950 boost referenced carb on my 174 blown 360, but I spin the engine way up in RPMs.
Find out what size blower it actually is before purchasing a carb.

Thanks for the reply. And you as well Fish66. My compression is I'm guessing 9.5 but maybe lower. I'm just going by what the stroker pistons claim 23cc dish claim 9.5.
But I do have the rhs heads and I beleive they are 62cc combustion chamber.
The cam I installed at the beginning of the summer and really liked it, it's new and did'nt want to change it out. For now.
Thanks for the info on the regulator I was wondering about that.
The fella at my work runs supercharger on his dragster at bandimere , was telling me 850cfm to give room for future boost or run a 750 and it would work as well. Although I did appreciate his input for sure, he tends to lean toward the all out race side. And my car is just something I take out on the weekends spin the tires here and there and cruise around. But after coming across this article on super chevy adding a 144 supercharger to a 383 stroker article and the power they came up with, with a 750 holly supercharger carb. I decided to order the one they had on that little motor and hope for the best. Thanks for replying. And I would like to find out for sure what size the little supercharger is but still have'nt came across anything to distinguish the differance other then maybe size. But I've never seen either one these little superchargers side by side to compare that either. Thanks again.