Stroker motor combonations

:Dalot of times if the motor is built right with a stroker your power range is down farther in rpms, which keeps you usually topped out around 6500 on most, which makes all parts especially blocks last longer, stock ones, mrl has fully worked pro comps or eddies that will get you 600 + with a 4 inch stroke, 4 inch is a little cheaper and easier, imm has a new set of cnc rhs heads that will get you there, both good guys, match the rest of the motor up with a good intake , carb, 10 or 11 to one comp, you will be where you want to be, best of luck