Neutral Safety Switch

RAMCTD2003 said

Thanks for the response. So I could take the pink wire that is on 86 now and run it to the start switch. The other side of the start switch would go back to 86 on the starter relay.

Click to expand...

Yes, after removing the ground connection to the starter switch.

RAMCTD2003 said

I will try it as soon as I find a replacement 70 amp Maxi fuse. It blew today when I obviously had it wired wrong.

Is there a way to test the NSS to make sure it is working?

Thanks again.

Click to expand...

Use your meter or test light to test the neutral switch. Positive meter lead on power and negative meter lead on the center terminal of the neutral switch. You should show voltage on the meter in Park or Neutral only, no voltage in Drive and Reverse positions.