Windshield Removal

http://www.forabodiesonly.com/mopar/showthread.php?t=14257&highlight=windshield+removal

check that thread out-- basically you need time & sunny day some non-metallic shims.

get all the trim off -- if so equipped
remove lockstrip __if so equipped
then scrape around the edges of the gasket to get it unstuck from the glass & the body of the car-- this means sliding under gasket edge both front& back between the glass --you are releasing years of build up.

this will take some time -- but you can save the gasket-- in case you need to re-use.
start at a top corner- slowly work your shims between the glass & gasket --at one point it will start to peel away-- then it will just slide out e-z
Lawrence