Steering shaft length

I don't recall the exact length. If I remember the manual steering is about 43".
Power a few inches shorter. Power use a different coupler with smaller spline size.
If you have the power steering shaft and coupler in your column it will fit.
I have had some shafts that would slide or telescope very easy and others that were more difficult.
Either way slide it till it fits over the spline till the roll pin notch lines up and tap roll pin into place to set the shaft at the correct length. The column should be bolted in to the dash
first then the spline and last the floor plate seal. This has always worked for me working
by myself. Take note of the missing tooth on the spline and coupler. It is made to clock in
one position.