1967 Barracuda Steering Component Help Needed

I recently inherited a 1967 Barracuda from my brother who passed away recently. It has a newly rebuilt slant six, but appears the car may have originally been a 273 car based on the VIN. The car has manual steering, and has 11" LBP Disk brakes with sliding calipers. He had recently replaced the upper and lower ball joint on the drivers side of the car. Other than that, the rest of the steering components appear to be stock to the best of my knowledge.

That said, the rest of the steering components need to be replaced in order to be road worthy again. Since I have a 1973 Dodge Dart with Power Steering and the larger 11-3/4" Disk Brakes, I was hoping to use some of the parts leftover from that project so that I can save some dough and get the Barracuda back on the road again. Since the center link on the 1967 Barracuda appears to be different from that of my Dart, it has been confusing to simply 'Google' this to find the appropriate answer as to what will and what won't fit.

From my 1973 Dart, here are some of the left over parts I have:
- 11/16" Tie Rod Ends and sleeves
- 9/16" Tie Rod Ends and sleeves
- Fast Ratio Pitman Steering Arm (T/A type from Firm Feel)
- Idler Arm

Will any of these fit the 67 Barracuda, or should I just bite the bullet and buy new stuff? If so, what's the best place to buy from other than the local parts store? I am aware of PST, Firm Feel, Summit, Jegs and a few others.

I've thrown a few photos in here all taken from the drivers side for further visual explanation.

Thanks to all in advance!