Trutrac 8 3/4 Axle Spacer

Finally got it installed. The spacer included with the dif needed to be ground down, it was way long. Kept it as square as possible and ended up with a tick under.010 endplay. Wish I had a mill or lathe as grinding isn't ideal. I'll check it again after I get some miles on it to see if end play is the same.

This went in a 62 with tapered axles, still shims in place under the brake backing plate. I like the gearing and the eaton seems to work pretty good even with a stock (for now) 318 poly.