My oil burning pig. Pics too!

Yeah Mope, thought I fixed that. Jeez! Well it's at the machine shop now. Looks like either the decks weren't done precise or the heads werre milled askew. My machinist had me give him a bunch of measurements and wer're pretty sure he can do a "compund cut" on the intake to get things squared up.

Probably gonna need a thicker gasket, he said Cometic will cut 'ya one any size you need.
Port alignment wasn't so good either. I'm not sure if I MIGHT have 2 different thickness gaskets when I'm done.....

Far as timing, I would like to try a 10 degree bushing in my MSD distrib, but can't remember what member here was making them. With timing locked it is "sloppy" below 2500 RPM. Spits, farts, etc.....2500 to 7000, though you best be holdin on! All the crap I've been through with this thing I forget that

1: you could park it on a white living room rug.
It don't leak, weep, or seep anything. AND it runs cool.

And 2: It did make a LOT of HP on the dyno. A dyno that the owner says is a bit "stingy". Just wanna get this intake thing right and call it a day.

I'm tired!