Crimping Tool

On battery cables I always use battery pellets, at least that what they call them at the auto parts store. A simple propane torch and a few seconds permanently secures the cable ends!! You put the pellet in the lug (holding the lug with vice grips or a bench vice) then you heat the lug until the pellet melts and you stick the cable in there. Be sure and check to make sure the cable (with bare wires) fits in the lug easily or it will not go completely in there when you try and stab it into the molten solder. Depending on the size of the lug sometimes you need to trim off a few wires so that it fits in there easily/

Easy peezy lemon squeezy!!

Treblig