Tanks Inc question

Larry, we use tanks inc stuff exclusively and it works great, they fit really well and we have had zero problems.

There are two ways to do the FI tank, depending on your FI system. We only do Magnum swaps in the shop but I can explain either way to do it. I will have to check out FITECH to see if they run a return line or just dead head their system.

You can either run a single line to engine, with a regulator in back by pump, or you can run a feed up to engine and a return line all the way back. The two linw system requires regulator to be up near engine or on engine.

On a Magnum swap, you can use an earlier fuel rail with regulator mounted on fuel rail run by engine vac or use a regulator back by tank and the later no press regulator rail.

One of these will work for you but like I said, I dont know much about FITECH other than they use a jug up in engine bay supplied by mechanical or carb style electric pump. Dont know where the fuel supply is regulated but would guess a vacuum pod on throttle body as most aftermarket TB FI systems seem to use.

If you are interested in a tank, we are a legit dealer and I would make you a deal since you are a fellow mopar fan and FABO member. the shop # is 541-955-0363 9-5 pacific time if you need any more specks or have nay more questions. Evan