65 Barracuda w/500ci RB, Stage VI Max Wedge Port Heads, 6-speed, and 5.38 Dana
Here are a few pics of the passenger side minitub in progress. My wife helped me make some templates out of thick paper; she laid on the garage floor and held them up to the open spots while I climbed in the car and marked them from above. After that, I cut them out, traced them onto a piece of the sheet of steel I have, cut them out and bent them to match the contour of the floor, tacked them onto the tubs, and then pulled the tubs to fully weld them on. You can see in the last two photos where they are welded onto the tubs and ready to be welded to the frame rails.
Here are a few pics of the passenger side minitub in progress. My wife helped me make some templates out of thick paper; she laid on the garage floor and held them up to the open spots while I climbed in the car and marked them from above. After that, I cut them out, traced them onto a piece of the sheet of steel I have, cut them out and bent them to match the contour of the floor, tacked them onto the tubs, and then pulled the tubs to fully weld them on. You can see in the last two photos where they are welded onto the tubs and ready to be welded to the frame rails.
