The outside carbs are opening for sure and car pulls great. Like stated above just wasn't tripping the micro switch in time. If anything the outboard are just about fully open at 5200ish and by that time I am getting ready to shift. I know another 1000 rpm left but I have the rev limiter set low for the time being. Just need to figure out a micro switch that will bring the nitrous on around 3000 with the outboard are 3/4 on the way to full.
I watched a few youtube videos on board with six packs and you can see linkage work slowly to full open especially on a 4 speed car. On the auto car you see the linkage go full and stay but not letting off to shift
