Dart wheel clearance issue
The factory spec for bias-ply tires is 0° to +3/4° camber. With radials, you want around 1° negative camber, which is going to make your situation slightly worse (maybe). I'd just leave the spacers in there, assuming they are fairly thin (1/8"?).
The factory spec for bias-ply tires is 0° to +3/4° camber. With radials, you want around 1° negative camber, which is going to make your situation slightly worse (maybe). I'd just leave the spacers in there, assuming they are fairly thin (1/8"?).
