318 Poly Turbo A Body
Re Phased my Distributor , so it has Reluctor/Rotor/Terminal post aligned at 16Deg BTDC (locked) , and I used the Vac advance plate to wind in 15Deg more for a total of 31Deg , I cut off the Diaphram and welded a S/S bolt shank slid a spring onto it (tensions against nut) so I can wind in or out advance . Because I have the Mallory Charger 6 (boost retard Box) I pull the timing back to 15 by 7psi , tested it at idle by hooking the Map sensor up to my compressor, worked well :)
Re Phased my Distributor , so it has Reluctor/Rotor/Terminal post aligned at 16Deg BTDC (locked) , and I used the Vac advance plate to wind in 15Deg more for a total of 31Deg , I cut off the Diaphram and welded a S/S bolt shank slid a spring onto it (tensions against nut) so I can wind in or out advance . Because I have the Mallory Charger 6 (boost retard Box) I pull the timing back to 15 by 7psi , tested it at idle by hooking the Map sensor up to my compressor, worked well :)
