fuel pressure drop

Don't forget to upsize the sender hardline too. I installed a big EFI filter at the back,just in front of the spring perch. There is kindof a pocket there.The filter wasn't cheap, but it is still in there 16 years later;so still less than a buck a year,lol. I have no filter on the pressure side,nice clean install under the hood. EFI jumper hoses.I stuffed the hard line into the front stub frame, and brought it out through a hole about 6 inches behind the pump. Then I extended it to about 1.5 inches from the pump. Just far enough away that engine movement won't tear the EFI jumper. The motor is chained down, but it does move around a bit.