HDK Tubular Coil Over for Stock Steering
Not sure if this is the first kit with the small upper balljoint, but here are some shots of the initial install before I break it back down for paint or powdercoat, haven't decided yet. I also added tabs on the lower arms for the Hotchkis swaybar I was running previously. And this is using the original Kelsey/Hayes spindle and calipers with machined to fit Mustang rotors for the 5x4.5 bolt pattern. The wheel I am running is a Wheel Vintique black steel 15x7 with 4" BS. Any more and it runs into the upper control arm BJ bucket.
Here's the fun side. Just had to unbolt and move the brake distribution block and the steering box.
Not sure if this is the first kit with the small upper balljoint, but here are some shots of the initial install before I break it back down for paint or powdercoat, haven't decided yet. I also added tabs on the lower arms for the Hotchkis swaybar I was running previously. And this is using the original Kelsey/Hayes spindle and calipers with machined to fit Mustang rotors for the 5x4.5 bolt pattern. The wheel I am running is a Wheel Vintique black steel 15x7 with 4" BS. Any more and it runs into the upper control arm BJ bucket.
Here's the fun side. Just had to unbolt and move the brake distribution block and the steering box.
