FiTech EFI system

This maybe useless info and you are on your own as how you use it.
While I wait for my T.B to come back from the mother ship(At least a month)I disabled my Fuel command thing.
As most of you know it is just a big bowl bowl with a pump in it...Keep that in mind when you are over thinking your tank vent..holly's have a 2 in vent that works just fine.. A long hose with fuel in it will be more of a problem. I have run out of gas twice drag racing my car(At a truck mud run)but not on the street.
SO lets see what is in side.....
You have your standard holly inlet needle and seat with a fome float and a fuel pump zip tied to a mount with a filter on the bottom..On mine the filter was jammed
hard into the bottom plate.(-0.020)..I cant see this working well.
The pump is held in by a short rubber hose that I cut appx. 0.200 off and replaced the hi-tech zip-ties with a SS clamp because the pump no longer laid on the bottom for support...I dont know if this will help me or not but it cant be a bad thing.. Now the filter has room to work.. Photos later....

DSCN1077.JPG

DSCN1079.JPG

DSCN1080.JPG

DSCN1081.JPG

DSCN1084.JPG