2016 Sema Mopar Hemi Swap
Both those questions get this answer:
seriously though... I can't tell you that it will work for sure or not.
Those engines, (pre-2013) and RAM engines are different than the intended engines for the kit. But of course very similar.
RAM engine for example has a different intake manifold and front cover, so some wires (to the alternator) will be on the wrong side, or wrong length. Some sensors might have different connectors, some sensors may be different (pre-2013 crank position for example). Different exhaust manifolds. Comparing the differences between the intended engine and the engine you wish to use down to sensor part numbers will help you decide if you want to make this kit work with your engine choice.
The instruction sheet does have each connector on the wiring harness broken down pin by pin if you are trying to use a different engine and may need to use a different connector or other wiring needs. For example:
but pre-VVT which is what? pre-09... now your getting complicated.
Both those questions get this answer:
seriously though... I can't tell you that it will work for sure or not.
Those engines, (pre-2013) and RAM engines are different than the intended engines for the kit. But of course very similar.
RAM engine for example has a different intake manifold and front cover, so some wires (to the alternator) will be on the wrong side, or wrong length. Some sensors might have different connectors, some sensors may be different (pre-2013 crank position for example). Different exhaust manifolds. Comparing the differences between the intended engine and the engine you wish to use down to sensor part numbers will help you decide if you want to make this kit work with your engine choice.
The instruction sheet does have each connector on the wiring harness broken down pin by pin if you are trying to use a different engine and may need to use a different connector or other wiring needs. For example:
but pre-VVT which is what? pre-09... now your getting complicated.
