Nubs on Cop Wheels
Hows this for low budget. Shifter collars from 67 automatic column shift (note set screw hole in lower collar) , take a cutoff wheel to them to knock off the shifter nub and indicator. then grind em slightly concave where your going to add filler, and fill em up with JB weld, then sand smooth, apply body filler, prime and paint. I made these a few years ago when floor shifter collars were hard to get, now the 68-69 ones are repopped for about $100, so its almost not worth it to mod them, since i have a ton of time in them.
Hows this for low budget. Shifter collars from 67 automatic column shift (note set screw hole in lower collar) , take a cutoff wheel to them to knock off the shifter nub and indicator. then grind em slightly concave where your going to add filler, and fill em up with JB weld, then sand smooth, apply body filler, prime and paint. I made these a few years ago when floor shifter collars were hard to get, now the 68-69 ones are repopped for about $100, so its almost not worth it to mod them, since i have a ton of time in them.
