Super tuning car runs good shooting for great

AJ/FormS said
Well yeah, I had that same shop straighten out a previously botched decking. That's what I brought it in for. The two decks were declining in opposite directions and also were not at the correct angles from side to side and one deck was lower than the other. I mean it couldn't get any worse. When I originally put the engine together, the pistons were a bit down in the holes, so I didn't care about them being a little uneven. But with the straightening out of things, they popped up. So now with an .039 FellPro I was rapidly running out of Squish. So things became a lil tense on the morning of the reassembly,lol.At least the intake fit now,yahoo.....

That's good you got it straightened out. The decks on factory chrysler blocks are horrid. Unfortunately many shops don't take the time to really measure things and get them right unless there using something like a rotter machining center. I switched careers and half to farm out my machine work now instead of doing it myself. It's been a complete headache. I plan to start picking up equipment in the near future, may take several years to get everything I need but that's my plan.