Toluene Dart - '73 swinger
Caliper brackets didn't exactly fit the calipers that were with the kit. But what do you expect from a cheapo brake kit. A little grinding and they line up.
Caliper was hitting on the lower portion of the bracket -
grind a little off -
and everything fits.
Drive shaft is SOOO close to fitting. At least they only need to shorten it a little bit. I also need to figure out what backspacing to use, the old wheels are 4" but a quick mock up with out the caliper shows them being a bit too tight on the outside. May have to run 4.5/5.0" Backspace if I want to fit 245's or 255's.
Caliper brackets didn't exactly fit the calipers that were with the kit. But what do you expect from a cheapo brake kit. A little grinding and they line up.
Caliper was hitting on the lower portion of the bracket -
grind a little off -
Drive shaft is SOOO close to fitting. At least they only need to shorten it a little bit. I also need to figure out what backspacing to use, the old wheels are 4" but a quick mock up with out the caliper shows them being a bit too tight on the outside. May have to run 4.5/5.0" Backspace if I want to fit 245's or 255's.
