Will Trick Flow Heads work on a B block 400

Oh sure, big cam, 7,000 rpm, 470 ci = big power.

But what if you have 400 ci, low compression, a .430" lift cam and 5,200 rpm? Surely that 270+ cfm at .400" lift with those heads will send that lowly 400 into convulsions and it will just shut itself off and make no power over the stock head.

Right?

I mean, way more head than the camshaft can handle. Useless!

Waste of money and time. That 400 needs smaller port heads! Maybe a conversion to install X or J heads on the 400 big block.

Bwaaaah, ha, ha, ha, ha..............!

Sorry, it's 5:30 AM here and I should be at the lathe working on the cam journal sleeve.

Good morning all!
Jim