Bought a set of buckets to replace bench seat in 71 Demon, came with all the screws and hardware loose in a box but with new covers installed. My question, is there supposed to be a bumper or stop of some sort opposite the latch (inboard side) and if so can anyone post a picture of it, and know where to get some? Seems to be all that I am missing.
71 Demon bucket seat assembly question!
- Thread starter GStewart
- Start date
-
Alaskan_TA
Well-Known Member
Adjustable bumpers on the inside, there are two versions - early & late.
Back in a bit with photos...........
Back in a bit with photos...........
Alaskan_TA
Well-Known Member
There is also a philips screw with a flat washer that goes on the seat bottoms for these to rest on, did you get those?
Alaskan_TA
Well-Known Member
2;
Alaskan_TA
Well-Known Member
3;
Wow Thanks great pics and description. I did get one large washer I thought was for a stop to reston. I'll have to get another and find the stops Thanks again.
Alaskan_TA
Well-Known Member
I can get a washer pic & check my stash also........
Alaskan_TA
Well-Known Member
4;
Alaskan_TA
Well-Known Member
5;
Alaskan_TA
Well-Known Member
6;
Alaskan_TA
Well-Known Member
Note what you need & let me know.
Email addresses are not allowed here per the rules, but PMs do not work for me.
So you can find my email address at The 1970 Hamtramck Registry Contact Page ;-)
Email addresses are not allowed here per the rules, but PMs do not work for me.
So you can find my email address at The 1970 Hamtramck Registry Contact Page ;-)
Thanks, I texted the guy I bought the seats from to see if he had them, have not heard back yet. I have the one stop and screw will need another and both bumpers if he does not have them. I'll let you know. Thanks again.
Shot you an email about the bumpers, guy I bought the seats from said he would see if he had them and have not heard back. If you have a set I would be interested.
Alaskan_TA
Well-Known Member
Email replied to with a question so I know more about which type you need. 
-
