Rust Repair Maiden Voyage
Turns out I'm allergic to the 410 filler. I won't be sanding that stuff inside the garage again. Anyway, I applied a skim coat of the 410, sanded with 60 grit, then applied another very thin coat and sanded with 60, 100, 220, and 400 grit. It's not perfect, but perfection wasn't the goal.
The weather is too cold for painting, but I went ahead and sprayed some 2 in 1 primer (Transtar 4603) to keep moisture out until I get a chance to paint. I'm painting up to the lower of the two parallel horizontal creases in the sheet metal.
Turns out I'm allergic to the 410 filler. I won't be sanding that stuff inside the garage again. Anyway, I applied a skim coat of the 410, sanded with 60 grit, then applied another very thin coat and sanded with 60, 100, 220, and 400 grit. It's not perfect, but perfection wasn't the goal.
The weather is too cold for painting, but I went ahead and sprayed some 2 in 1 primer (Transtar 4603) to keep moisture out until I get a chance to paint. I'm painting up to the lower of the two parallel horizontal creases in the sheet metal.
