Budget 360 build
I don't really have a budget I just want to see what others have done and try to determine the best bang for my buck, id like to keep it under 3k if I could but my budget is flexible and make 400hp or more.
Copy then MP create engine, 360/380hp.
As new of a 5.9 with the lowest mileage possible to start with as your base.
750 cfm carb
Single plane M1 intake. RPM exceptable!
The create engine cam was a Hyd. roller cam. Duration @.050 was 230/236-low .500 lift.
Reuse stock roller lifters and spider
Header suggestions are for a 1-3/4 primary tube. Hooker has super comps and tti has a good set as well, but these are not cheap and will consume most of the budget. (About 1/3)
These engin have been known to dyno better than 400hp.
Since the MP cam is sa s in these create a iTunes are no longer available for the most part, call Comp Cams or Lunati or Hughes engines and tell them what you are doing and want a better cam to replace the MP unit.
The idea of a OD trans is great but cost over 2 k rebuilt and you'll still need a converter.
Or if a manual, cheaper but more complex in the number of parts needed to convert from auto to manual.
