6.1 Hemi 69 Barracuda Fastback Father Son Project
Some before and after shots.
Muratic acid cleaned.
To get the Brown tone I soaked in Evapo-Rust to darken the metal a little and then sprayed with VHT Clear Caliper Paint.
I like how it turned out.
Will do the hood safety hook and trunk latch hardware the same.
The little spring broke so it's missing until I find a suitable replacement.
Need to lower my core support bottom to set the radiator lower.
Going to section the bottom about 1.25"-1.5" so I can set the radiator about an inch lower.
video link - https://goo.gl/photos/NiwnCD7nihBBkAbQ6
Some before and after shots.
Muratic acid cleaned.
To get the Brown tone I soaked in Evapo-Rust to darken the metal a little and then sprayed with VHT Clear Caliper Paint.
I like how it turned out.
Will do the hood safety hook and trunk latch hardware the same.
The little spring broke so it's missing until I find a suitable replacement.
Need to lower my core support bottom to set the radiator lower.
Going to section the bottom about 1.25"-1.5" so I can set the radiator about an inch lower.
video link - https://goo.gl/photos/NiwnCD7nihBBkAbQ6
