I received a notice stating that eventually all walbro pumps in the future will be stamped TI automotive. So if you get one stamped TI it is basically a walbro from them. By the way the aeromotive setup is good just a lot of unnecessary work. You have to drill a 31/4 hole in tank for the phantom pump. Tanks Inc is all done and a neat package when installed.
In my case it was all "one off'. I had to modify the tank no matter what, so one hole saw is the same an another. The bigger issue for me was fuel lines, I had to re run the fuel, 5/16 up to 3/8in and run a return.
The other thing that made selecting Aero easy was I called both Holley and Aero. I couldn't get through to Holley but the Aero folks were quite helpful.
