FiTech Initial Setup

Had time after the 4th of July weekend to install the FiTech system on my motor. Part #30002. I was following along in the instructions putting in the initial setup with the handheld and came across 2 things I had a question about before I started it.

First in Engine Setup, "If FCC set pwm 40" and this was set to 74.9% from the factory. Instructions didn't mention this step.

Second in Ignition Setup, "VR Advance 4000" and this was set to 17.6 degrees. I have my base timing set to 10 degrees. I'm using the FiTech to control timing.