68 Barracuda Fastback build
Done a lot of work over the past months, trying to get it on the road for Dream Cruise :
I finished my front suspension with rebuilt and reinforced LCAs, new tubular UCAs, etc etc.
I also welded the torque boxes under the car, and reinforcement plates for the rollcage
I've also started getting the body down to bare metal, with some bad surprises... driver side fender is bad, lots of rust behind the wheel (and patch panel was made of shitty metal from Taiwan, impossible to weld...)
I also shaved some weight off the trunk, and cleaned the doors and trunk too
And I relocated the shock plates on the 8-3/4 rear end back to their original position.
Done a lot of work over the past months, trying to get it on the road for Dream Cruise :
I finished my front suspension with rebuilt and reinforced LCAs, new tubular UCAs, etc etc.
I also welded the torque boxes under the car, and reinforcement plates for the rollcage
I've also started getting the body down to bare metal, with some bad surprises... driver side fender is bad, lots of rust behind the wheel (and patch panel was made of shitty metal from Taiwan, impossible to weld...)
I also shaved some weight off the trunk, and cleaned the doors and trunk too
And I relocated the shock plates on the 8-3/4 rear end back to their original position.
