Questions on recent alignment

If you read it.. it clearly says I mentioned it was originally aligned with old tires. Which had a bad tire that caused the car to pull hard right. So I swapped the 2 fronts and it pulled slightly left proving I had a bad tire. So bought brand new tires had them instaled and it pulls slightly right.
I don't have the sheet in front of me but I'm pretty sure the offset of caster is on the correct side to compensate for crown. And like I said I need to go back to the shop to have the toe fixed to fix wheel center and add a bit more toe in. Which is what I see is the only thing wrong with what they dI'd really... if they truly can only get 1.3 degrees of caster that's not their fault. And if they made the caster even between both tires... the car would pull even harder I would imagine.
I could ask them to see how much more caster they can dial in if the camber was set to .25 degree instead of 0. It's just a daily driver with a stupid slant6 I drive it like a grany anyways I donr care for cornering in this car. Just want to be straight down the highway