Questions on recent alignment

The car pulls the same amount weather I'm on the freeway or the street. I too would like it to be totall straight on freeway and deal with crowned road. My main concern with my first post is do I really only have 1.3 caster total, and it seems everyone agrees it's totally possible with normal bushings.
I wasn't really worried about toe or camber. Even the slight wandering/unstabillity and returning to center from a turn is so minimal I probably shouldn't have really mentioned it, I'm just picking hairs really as far as that goes.
What doesn't make sense is most seem to agree I have way too much offset in caster, but yet it still pulls.. toe is even, camber is even. Yet it still wants to go right. And like I mentioned before the steering wheel doesn't turn right, it just veers right. I don't see what else would cause it to do this, if I remember right the rear wheels has equal toe in and fairly everything else between the 2 sides.
I used a very similar homemade tool to pull the bushings out when I did them. I just honestly hate thinking of pulling the arms back off again, also Id be totally fine with the way It drives and feels now if it just went straight.