Stop in for a cup of coffee

-
41642_2000x2000.jpg
 
Yeh, don't see a need for that either.
Not sure deciphering there data sheet... I think this one functions as an 'A/B' with no center position. For some reason they downgrade it to 8A for DC? They make this with just about any configuration. With or without center. Any position NC or NO, Momentary or not... I would call them and be sure I got the right one
Oops, missed the link...
CW1S-2E20 - IDEC - Rotary Switch, 2 Position, Non Illuminated, 90 °, 10 A, 8 A | Newark element14
4936003.jpg
 
Yeh, don't see a need for that either.
Not sure deciphering there data sheet... I think this one functions as an 'A/B' with no center position. For some reason they downgrade it to 8A for DC? They make this with just about any configuration. With or without center. Any position NC or NO, Momentary or not... I would call them and be sure I got the right one
AC current goes to zero every 20 milliseconds or so, putting out the arc. DC doesn't do that. The gap in open position isn't all that long, which means the arc lives for quite some time, eating away at the contacts, killing life expectancy.
 
AC current goes to zero every 20 milliseconds or so, putting out the arc. DC doesn't do that. The gap in open position isn't all that long, which means the arc lives for quite some time, eating away at the contacts, killing life expectancy.
Makes sense. But then a lot give same rating for both...
 
heres the situation. the 78 w200 I have only has a 20 gallon tank. I have room on the other side of the frame for a 2nd 20 gallon tank, which I also happen to have. the thing sucks gas so badly, I can go about 80 miles on 20 gallons. so I want to add use this 2nd tank, giving me 160 mile range if that makes sense. I've also kicked this idea around for the dart as well since I want to take it on long cruises.

Even with two tanks, `160 miles is not a long cruise.... :rolleyes: :poke:
 
That cam was definitely drilled wrong, to small a hole and has a chamfer on the bottom that restricted the oil flow prob 1/32 the hole is. Hope they do something with it. That's one of the probs with a project car might be years before we know a part is not right.
He ate a side of expensive side of rockers who will pay for it? Most of us are on a shoestring.
 
Geez, what's with the scammers lately? I've been getting all sorts of Nigeria-style e-mail in my spam folder the last week or so. Haven't seen any in years! Gmail usually deletes most of it before I even see it.

If you post something for sale, they come running...

I get more spam when I post on craigslist...
 
-
Back
Top