66 Barracuda cluster- stripe gloss or flat

barracudadave67 said

I used 1/8th in black pinstripe tape on mine, (66 B-Cuda) and chrome 1/8th in pinstripe tape on the high outer edges. I have to pull the cluster again, to check out the gas gage, so maybe I can get some pics. the top sections were hard to get straight when it was in the car, so I am going to redo parts of it, when out again.
I think Summit has the tape in flat, and semi-flat, mine is gloss I got it at Summit.

barracudadave67

Click to expand...

Hey Dave,
I thought about the pin stripe option. When I used to work at the dealership many moons ago I was the pinstripe tape myster. I did not want to go pinstripe because when it gets hot in the car, ( much hotter than the outside of the car) the pinstripe has a tendency to curl and shrink and worst yet lift. And yes the straight sections are hard to keep from pulling too tight or going crooked. I think I'm going to get a black nail polish and try it. I'll mask the best I can and giver her hell.
I almost did red to match the interior and outside but I think it needs the black to break it up a bit.
Thank you for your suggestion.
Joe