Picked it up today :thumbsup:
Bore - 4.03
Stroke - 4.00
Dome relief - 13cc
Head - 62cc
Gasket - 8.9cc
Deck - 0.005
The Scat kit is cast crank, I-beam rods, Icon forged pistons.
Block was line bored and squared.
The shop tool printout I'm looking at says CR of 10.84.
Cheers
I pulled my motor out this morning to do the exact same build. Are you running flat top pistons and if so do you know the thickness on your head gasket?
