Garage smells like fuel

Actually, the standard Barricade hose has the 30r14 spec. The Barricade injection hose is a step above that.

This is the standard Barricade hose:

Barricade™ Fuel Line Hose
Low-permeation, premium hose for use on carbureted engines, PCV and EEC systems, and for fuel
return hose on fuel injection systems. Not for use on the pressure-side of fuel injection systems.
Approved for use with leaded and unleaded gasoline, diesel, bio-diesel, E-85, Methanol, Ethanol, and
gasohol fuels. Patented 5-layer Greenshield™ barrier technology keeps fuel out of the environment
while delivering peak fuel efficiency.
• Meets SAE J30R14T1, EPA 40 CFR 1051.110 , and CARB small engine off-road requirements for
low permeation
• Textile spiral layer (2 spiral)
• Thermoplastic barrier layer
• Oil, heat, ozone and abrasion resistant cover
• Recommended for carbureted engines in cars, light trucks, off-road vehicles and small engines
NOTE: Do not submerse in gasoline.
WARNING: Do not use on pressure lines on fuel injection systems or cooling system applications.
Use MPI (4219D) or Barricade Fuel Injection (4219BF) hose for Multi-Port Injection systems.
Temperature: -40° F to 257° F (-40° C to 125° C)
Packaging: Working 2’ retail 25’ length 250’ reel
I.D. (in.) I.D.(mm) O.D.(in.) O.D.(mm) (psi) Part No. Part No. Part No.
3⁄16 4.8 13⁄32 10.3 50 27302 27312 27321
1⁄4 6.3 1⁄2 12.7 50 27303 27313 27323
5⁄16 8.0 9⁄16 14.3 50 27304 27314 27324
3⁄8 9.5 5⁄8 15.9 50 27305 27315 27325
1⁄2 12.7 25⁄32 19.8 35 27306 27316 27326
(Product Type 4219BG)


The following is the Barricade fuel injection hose.


Barricade™ Fuel Injection Hose (MPI)
Low-permeation, premium hose for use on all fuel systems, including fuel injection (MPI). Approved
for use with gasoline, diesel, bio-diesel including soybean methyl ester (SME), rapeseed methyl
ester (RME), palm methyl ester (PME) per ASTM D6751, E-85, methanol, ethanol, ethanol extended
gasoline, and gasohol fuels. Patented 5-layer Greenshield™ barrier technology keeps fuel out of the
environment while delivering peak fuel efficiency.
• Exceeds SAE J30R14T3 (except for kink resistance) as well as low-permeation requirements for CARB
• Aramid reinforcement spiral braid for superior burst strength
• Thermoplastic barrier layer
• Oil, heat, ozone and abrasion resistant cover
• 225 psi working pressure rating
• Recommended for any fuel injection applications for superior service life
NOTE: Do not submerse in gasoline.
Temperature: -40° F to 275° F (-40° C to 135° C) continuous, up to 302°F (150°C) intermittent
Packaging: Working 2’ retail 25’ length 250’ reel
I.D. (in.) I.D.(mm) O.D.(in.) O.D.(mm) (psi) Part No. Part No. Part No.
1⁄4 6.3 1⁄2 12.7 225 27334 27339 27344
5⁄16 8.0 9⁄16 14.3 225 27335 27340 27345
3⁄8 9.5 5⁄8 15.9 225 27336 27341 27346
(Product Type 4219BF)
A40 l