Need Advices to Setup Rear Suspension

Hi Folks,

Finally I could test my new set of Viking DA Shocks that I installed in my car. These shocks already improve my 60ft from 1.58 to 1.54 but I'm still having tire bouncing on the start.

I'm using this setup on the Shocks:

Front: Compression = 12, Rebound 2.
Rear: Compression = 4, Rebound 12.

My car is an A Body, 3300lbs Small Block with 464WHP, Footbrake, 4500 Stall Converter, Hoosiers 28x10.5, 4.56 Gear, Leaf Springs with Assassin Traction Bars.

I'm sending two videos of the start... So if someone could see that and can support me to fix this issue will be great.





Thanks...

Actually looks like a pretty decent launch but some on here talk about Squat.squatting in the back means you're not transferring the all of the weight to the ground some of it was absorbed by the springs. you actually got lift the moment you left the line in the rear which indicates is pushing down on the tires and up on the body which is what you want however the more the body lifts in the rear the less it plants the tires. just my opinion don't know if that helps. What was your 60-foot time