Harwood Scoop
Not super happy with the cheep "gasket" at the base. I had to pull the scoop off a few months ago as it had rolled over and turned white. I used 3M high tack adhesive this time and it stopped it from rolling over for a bit but of you look close you can see it starting to separate again and it has started to turn back white. Next time I pull it off I'm just gonna use black caulk around the seam and be done with the gasket. I could dam near not use anything the gaps are very small. (The gasket is only about 1/16" thick)
Not super happy with the cheep "gasket" at the base. I had to pull the scoop off a few months ago as it had rolled over and turned white. I used 3M high tack adhesive this time and it stopped it from rolling over for a bit but of you look close you can see it starting to separate again and it has started to turn back white. Next time I pull it off I'm just gonna use black caulk around the seam and be done with the gasket. I could dam near not use anything the gaps are very small. (The gasket is only about 1/16" thick)
