I did. I have a 68 Barracuda with a 340 and put a Sanden style pump on. I run March Performance pulleys and used their kit. I ended up making a few hoses. I cut the factory hose off from the low side and tig welded a crimp fitting on it and then crimped new rubber and a new end on to go to the pump. Kept everything else the same. Factory condenser, evaporator, filter/drier, hard line running on the passenger inner fender, TX valve, you name it, it's stock, except the Sanden pump. Kept it R12 too. It blows cold and works like a charm.
