1968 Dodge Dart Engine Bay Wiring Fix Questions
Cut the circled wire and get rid of the ECU connector to the right. Splice the remaining wires on the ballast together and tape them up nice. Run your original Coil+ wire to the MSD small red
CAVEAT!!!! You should ONLY HAVE the two wires from the MSD connected to the coil. NO OTHER WIRES!!! No condenser and no tach to the coil
Cut the circled wire and get rid of the ECU connector to the right. Splice the remaining wires on the ballast together and tape them up nice. Run your original Coil+ wire to the MSD small red
CAVEAT!!!! You should ONLY HAVE the two wires from the MSD connected to the coil. NO OTHER WIRES!!! No condenser and no tach to the coil
