Intake gasket opinions

Mike converted my Hughes rockers to cup adjusters when he made my correction shims for my Trick Flow 270's. I now have oiling from the MRL lifters through the pushrods just for the adjusters, and I still oil the shafts through the feed from the cam. I am hoping this is a good compromise to using full time oiling for the shafts. I wasn't aware of that modification until well after the shortblock was assembled and in the car. I didn't want to do the groove in the cam journal to get full time oiling to the shafts as I didn't want to steal oil from the mains. This seemed like the best alternative for now until a later date when the shortblock comes out and is easier to modify. The other upside to this approach is that it gives the rocker better geometry and less loss of lift.