Trim removal, '64 Barracuda

to remove the rocker panels isn´t rocket sience. first remove the screw which secures the panel, than loosen the fender well trimm where it touches the panel (take out some of the screws, so you can shift it sideways.) than you can slide out the rocker panels.
no need to break the edges of the plastic clips.

removing the clips is also very easy. just take a drill, screwdriver (what ever you like) and a Phillips screw... drill the screw right in the middle of the plastic plug which secures the clip (only about 1/4 inch or so, just to get some grip) then take your pliers and pull the screw with the plug. the clip should be easy going out now


forgot to mention: this should work front or rear, maybe you have to remove your wheels first (depends on the width of them)