Qa1 upper control arm and moog offset bushing help

I would assume that the moog bushings would not fit the Qa1 arm due to the fact that they are running poly bushings with no sleeves, secondly most aftermarket control arms manufacturers use one type of poly bushing whether it is a mopar, ford or gm control arm as this is an aftermarket piece. So from a production stand point they only have to carry one part number and change the inner sleeve to fit the corresponding application. If it were me I would pull the control arm out (qa1) pop one of the bushings out and I bet on the end facing in is a part number to the poly manufacturer and you maybe able to Google it. But my money is on that you will not be able to fit a stock moog bushing to their arms.