I’ll give you a hot tip.
Take the spindle off the right, and swap it left, left to the right. now you can mount a rack at the the front of the k member.
Did this 30 years ago on a drag car.
Went 6.0 in the eighth, went straight, drove nice.
I'll give you a hot tip, look up the term "Ackerman". If you flip the steering arms around for front steer, you throw your Ackerman angle out the window.
It's "ok" for a drag car if you set it up with very little suspension travel in the front. But it's a disaster waiting to happen running on the street.
And also, you don't need to flip the spindles. You can swap the spindles left to right all you want, the alignment numbers don't change. All it does is move your calipers from the front to the back. Or vice-versa, depending on how the calipers are already mounted. The steering arms/lower ball joints are what need to be swapped for the front steer rack. But again, not on a street car. If you want a rack on a street car, you need one of the full coil-over conversions like the RMS Alterkation or HemiDenny's conversion. Front steer with stock mopar suspension components is asking for trouble.