EZ wire Hazard switch
You still need a separate switch. you could do it with a switch and 3 pole relay, and maybe a 3 pole toggle switch and some diodes........or maybe a SINGLE pole switch and 3 or 4 diodes. They would have to carry the current of the lamps so you would want say, 5A diodes or so
Pretty sure this will work. "Stock" TS wiring is unchanged except you branch into the brake switch output line, and the front left and front right lamp wires. Toggle/ pull/ rocker switch should likely be 20A rated, diodes 5A or more at 24V or more PIV The bar on the diodes corresponds to the bar on the diagram
That is designed to feed the hazard flasher which on a locking column car simply ties into the hazard flasher wire into the TS switch. I'm guessing there's a socket in your fuse panel?? for both the turn and hazard flasher?
You still need a separate switch. you could do it with a switch and 3 pole relay, and maybe a 3 pole toggle switch and some diodes........or maybe a SINGLE pole switch and 3 or 4 diodes. They would have to carry the current of the lamps so you would want say, 5A diodes or so
Pretty sure this will work. "Stock" TS wiring is unchanged except you branch into the brake switch output line, and the front left and front right lamp wires. Toggle/ pull/ rocker switch should likely be 20A rated, diodes 5A or more at 24V or more PIV The bar on the diodes corresponds to the bar on the diagram
