W2 408 Dyno results today !
Frankly, I would have thought 500/500 would be a slam dunk for that combo, with probably another 20 or so on the table with more cam duration.
The heads on the motor for the sheet I posted flowed about 280.
Here’s one from a few years ago.
410, 10:1, pump gas, mild rpm heads(flow 270), gasket matched Victor, 1-3/4 > 1-7/8 headers, ootb QFT SQ-850, 251/259-108 roller, .600/.600, Mancini 1.5’s.
I wasn’t the one running this engine......... there was power left on the table with the jetting.
The carb was way rich, and the bsfc numbers weren’t good.
The target for this build was to be around 525hp.
Sometimes it ends up that you look like you know what you’re doing.
Frankly, I would have thought 500/500 would be a slam dunk for that combo, with probably another 20 or so on the table with more cam duration.
The heads on the motor for the sheet I posted flowed about 280.
Here’s one from a few years ago.
410, 10:1, pump gas, mild rpm heads(flow 270), gasket matched Victor, 1-3/4 > 1-7/8 headers, ootb QFT SQ-850, 251/259-108 roller, .600/.600, Mancini 1.5’s.
I wasn’t the one running this engine......... there was power left on the table with the jetting.
The carb was way rich, and the bsfc numbers weren’t good.
The target for this build was to be around 525hp.
Sometimes it ends up that you look like you know what you’re doing.
