Valve job on os valves

Slant Six Bumblebee said

SOry for the multitude of posts recently but i am rebuilding my head and converting to a super six currently. I was wondering if i should get a multi angle valve job with my new oversize valves. they are the 1.7/1.44 valves from orgen cams (just up the street) and if the hp gains are minimal or with the cost.

Click to expand...

Short answer,Yes.
More detailed answer, ask if they will add a 4th 70 degree to open the throat to size for the 1.7 valve.
Gasket match the head, port the floor from the window in about a fat inch ish..then quick roll down/decend into the floor about .060 ish straight/toward the valve...then go from the bowl side and work the ssr to the floor work...that's your new and improved short turn. It will have 3 parts, entrance,runner, desension ramp.