Requested oiling mod info

One other way that I’m thinking about, the top end doesn’t need oil for 15-20 seconds. I have two nitrous like solenoids that I could tie into each passage way to top, one at bottom and one at top, drive a plug halfway down. Then just before launch, shut them off or anytime before, so oil drains back to pan, after pass turn back on down return road.
Some modified production guys running a 277 small block (screaming at 11,5) has no oil going up top, they take the valve covers off, squirt oil on everything put covers back on and run it. The other thing he said he might try is installing a tube in the valve cover with 8 little drip holes to oil right over the pushrod cups, oil would then sling over the rest (springs) just fill it up before the run. Maybe 5oz or so