Misfiring after Carter 2bbl install
If you feel lucky you can pull out the 2 lower idle jet screws, spray some carb cleaner in the holes and blow them out with compressed air.
Polish up clean the ends of the idle jet screws and give it a go again.
A small parts tag wire can assist in cleaning out the plugged idle ports.
Readjust your idle speed richness when done.
If you feel lucky you can pull out the 2 lower idle jet screws, spray some carb cleaner in the holes and blow them out with compressed air.
Polish up clean the ends of the idle jet screws and give it a go again.
A small parts tag wire can assist in cleaning out the plugged idle ports.
Readjust your idle speed richness when done.
